The hotel WiFi verification interface does not come out

time：2025-08-02 16:01:22 Smart Hardware

Hotel wifi does not pop up the certification page

If the hotel wifi does not pop up the authentication page, you can try the following methods:

1. Check your browser security settings to allow pop-ups.

2. Open cmd on the computer, enter ipconfig, check what is the IP automatically obtained by the wireless network card, if it starts with 169, it means that the IP acquisition failed. You can run ipconfig /release and then ipconfig /renew in the cmd window. Generally speaking, you should be able to get the correct IP at this time, ipconfig and check again, if it starts with 192.168, then it is right.

3. Connect to the WiFi, an exclamation point will appear on the wireless icon before verification, indicating that the WiFi has been connected at this time, but there is no Internet access.

4. Tap the wireless icon at the bottom right of the screen and left-click "Open Network and Sharing Center" below the pop-up network connection window.

5. Left-click "Change Adapter Settings" in the pop-up window.

6. Click on Wi-Fi and right-click to open the property settings.

7. Look for the Internet Protocol version 6 attribute in the pop-up prompt box, and enable automatic acquisition of both IP addresses.

8. After the setting is completed, click "OK" to exit, close the browser, re-open it, and the Internet authentication interface can pop up automatically.

# Smart Hardware #

《The hotel WiFi verification interface does not come out》 This does not represent the views of this website. If there is any infringement, please contact us to delete it.

Latest article

Recommend

Ranking