Detailed steps to install the TC7102 Huawei router

time：2025-05-29 15:01:37 Tech Trends

Reference content 1:

1. Plug in the network cable and power cable of the Huawei TC7102 router.

2. Connect the router to the modem. Connect the Gigabit port on the modem (if no other wired Internet access equipment is needed) to the WAN port of the router with a network cable.

3. Connect the management terminal to the router. If you have a computer with a network port and a second network cable, you can directly connect the computer to the LAN port of the router. If there is a problem with this step (the password is not correct or the network with this name cannot be found), press and hold the wps button on the back of the router until the router indicator flashes (some are called reset keys, some need to use a pin to poke instead of buttons) to reset the router. In short, use a computer or mobile phone wired and wireless to connect to this router casually.

Reference content 2:

1. Plug in the network cable of the Huawei TC7102 router with the power cable.

2. After the network cable of the Huawei TC7102 router is plugged in and powered on, the mobile phone can receive the wifi signal, and then proceed to the next step 3. Open the browser and enter 192.168.3.1, and then the browser will remind you to enter the user name and password, which is usually admin, which can also be seen on the back of the router.

4. Then you need to enter the broadband account and password, and consult the operator who applies for broadband installation.

Reference content 3:

1. Plug in the network cable of the Huawei TC7102 router with the power cable.

2. After the network cable of the Huawei TC7102 router is plugged in and powered on, the mobile phone can receive the WiFi signal and proceed to the next step

# Tech Trends #

《Detailed steps to install the TC7102 Huawei router》 This does not represent the views of this website. If there is any infringement, please contact us to delete it.

Latest article

Recommend

Ranking