How to connect the B360 motherboard switch cable

time：2025-02-22 16:02:36 Smart Hardware

What is the wiring method of B360 small carving motherboard?

In the first step, screw the screws and plastic nails that come with the case or motherboard to secure the motherboard into the corresponding positions of the motherboard and the case.

The second step is to pry off the seal of the I/O interface on the chassis. Note: You can remove the bezel at the corresponding position behind the chassis according to the motherboard interface. These bezels are directly attached to the chassis and need to be jacked open with a screwdriver and then pulled off with needle-nose pliers. The additional bezel position of the card can be decided as needed, and not all the bezel should be removed.

Step 3, then align the motherboard with the I/O port and put it into the chassis.

Step 4, Finally, align the motherboard fixing holes with the screwing posts and plastic nails, and then secure the motherboard with screws.

# Smart Hardware #

《How to connect the B360 motherboard switch cable》 This does not represent the views of this website. If there is any infringement, please contact us to delete it.

Latest article

Recommend

Ranking