Router bridging is always disconnected

time：2024-09-25 15:03:10 Tech Trends

What should I do if the route bridge is disconnected after a while, and the router bridge is used and the connection is often dropped

1. The signal of the main router is too weak, so that the router bridge is often disconnected, at this time, we can adjust the position of the router, or reduce the distance between the two routers, to ensure that the secondary router can scan the strength of the main router is greater than 20DB.

2. When setting up the router bridging, the DHCP server of the secondary router is not shut down, we should select the DHCP server of the secondary router as the shutdown state.

3. When setting up the bridging function, you should modify the IP address of the LAN port of the secondary router to ensure that it does not conflict with the primary router.

4. Then we should set the wireless channel of the main router, you can set the wireless channel of our main router to 1, 6, 11, which can prevent interference caused by too many wireless signals around.

# Tech Trends #

《Router bridging is always disconnected》 This does not represent the views of this website. If there is any infringement, please contact us to delete it.

Latest article

Recommend

Ranking