How to set up the router as a switch

time：2025-08-07 08:01:08 Tech Trends

How to use the router as a switch

How to use a router as a switch

1. First, log in to the router management interface

2. After entering the router management interface, select "DHCP Server" → "DHCP Service" on the left menu bar, select not to enable "DHCP Server", and then save it, as shown in the following figure:

3. Then select "Network Parameters" in the left menu bar→ LAN port settings, change the IP address of the LAN port to: 192.168.1.254 or other IP addresses as long as they do not conflict with the local IP addresses of other computers, it is recommended that you change it to 192.14, the above settings, the basic router can be used as a switch, but it should be noted that the WAN port of the router is not available, and the other four ports can be used as switch ports.

# Tech Trends #

《How to set up the router as a switch》 This does not represent the views of this website. If there is any infringement, please contact us to delete it.

Latest article