How to use the Sony camcorder charger

time：2025-06-29 09:02:20 Smart Hardware

How to use the Sony camcorder charger

Here's how to use the Sony Camera Charger:

1. Install the battery on the charger, connect the charger to the plug and then plug it into the socket; The charger indicator flashes to indicate that it is charging; It takes about 3-4 hours for the indicator to stop flashing, and it keeps on to indicate that the battery is fully charged; Remove the charger from the socket, remove the battery and replace the camera.

2. When using the adapter for charging, the camera should be powered off. Check and confirm that the camera's display is blank. If it is not blank, press ON/OFF to power off the camera. Connect the included USB cable to the USB-AC adapter before plugging the adapter into a home power outlet. Connect the USB cable to the camera.

In addition, Sony's civilian flash DV has two charging methods:

A. Charge through the machine (when powered off) using the supplied power adapter.

B. Use the USB port next to the hand strap (an extension cable can be added) to connect to the computer (in the shutdown state) and charge the machine through the machine.

However, from the point of view of safety and machine battery maintenance, it is strongly discouraged to use these two methods to charge the machine.

# Smart Hardware #

《How to use the Sony camcorder charger》 This does not represent the views of this website. If there is any infringement, please contact us to delete it.

Latest article

Recommend

Ranking