LJ2605D the printer is cleared

time：2025-07-29 09:01:07 Smart Hardware

Lenovo printer LJ2605D clears

The method of clearing the Lenovo printer LJ2605D is as follows:

1. Open the front cover when the machine is turned on;

2. Press and hold the "Confirm" button until "Drum unit" appears on the screen, then let go.

3. Press the confirm button and the screen prompts "Reset Exit".

4. Select "Reset";

5. When prompting "Accept", close the front cover.

In addition, if the toner lamp is always on after the printer is refilled (cannot be cleared), you can try the following methods:

1. Find a moving part on the left side of the printer and gently push the moving part down with your finger.

2. Find a hole on the right side of the printer, this hole is the hole of the toner hatch cover detection switch, and there is a tact switch inside;

3. Find a suitable knife or something to insert in;

4. At this time, the printer should be started, self-check, when the ready light is on, the printer enters the printing state. Clearance is complete.

It should be noted that these methods may vary by region and specific model, and you need to refer to the printer's manual or consult a professional for specific operation.

# Smart Hardware #

《LJ2605D the printer is cleared》 This does not represent the views of this website. If there is any infringement, please contact us to delete it.

Latest article

Recommend

Ranking