Replace the waste water valve of the Xiaomi under-kitchen water purifier

 Content 1:

Step 1 - Peel off the label on the back (use a hair dryer to blow the hot corner for better tearing).

Step 2 - Remove the bottom plate cushion and screws, lift the plate of the nameplate, and the bottom plate can be removed.

Step 3 - Remove the two screws of the wastewater solenoid valve, and you can pull it out directly.

 Content 2:

 Step 1: Tear the label and remove the 4 screws.

 Step 2: Tear off the mat and remove the 4 screws.

 Step 3: Open the back cover, first pull up the label box, and then snap out the bottom cover.

 Content 3:

The first step is to disassemble the surgery, with four screws at the bottom, and the back sticker is torn, and the two screws are to be disassembled.

The second step is to open the bottom cover, three white valves, the one on the far left is the waste water valve, and the top four screws are fixed.

The third step is to disassemble the waste water valve, remove the white plastic part, and remember to take pictures during the process to facilitate the installation back. Dismantling found that the filter screen of the wastewater valve was seriously blocked.

 Content 4:

1. The Mi Water Purifier can be connected to the Mijia client of the APP, through which you can view the tap water quality, the change curve of the purified water quality, and the use of the filter cartridge. all kinds of data give people a very intuitive feeling , and the experience is still good .

2. The water purifier filter element needs to be replaced, but there will be some impurities in the new filter element, especially the carbon particles will be flushed out during the flushing process of the activated carbon filter element. When a water purifier filter is first installed, these contaminants are flushed to the R 0 reverse osmosis filter and to the solenoid valve and wastewater pipe that discharges wastewater. This can damage the R 0 RO filter and even clog the wastewater solenoid valve, especially in areas where the water quality is poor.

3. Therefore, it takes some skill to replace the filter element of the Xiaomi Kitchen Water Purifier. The main principle is that the PP filter element can filter out most of the larger particle impurities, so there must be a PP filter element between the new filter element and the R 0 reverse osmosis filter element & solenoid valve during the flushing process. For example, if the No. 2 active filter element is replaced, the new No. 2 filter element and the No. 1 PP filter element need to be reversed for flushing, and the impurities flushed out of the No. 2 filter element are replaced before replacing them.

 Content 5:

1. There are two designs of Xiaomi water purifier: kitchen and kitchen to meet the needs of different families.

2. The water purifier itself is easy to clean and should not be stained with oil.

3. The price of the filter element is affordable, 1PP cotton is 59 yuan, 2 pre-activated carbon is 69 yuan, 3 reverse osmosis is 499 yuan, and 4 post-activated carbon is 69 yuan.