Monitor playback skipping a reason

time：2025-05-27 09:01:15 Smart Hardware

What is the reason for the automatic skip during the playback of the surveillance video

There are several reasons why surveillance footage is automatically skipped during playback:

1. Camera Packet Loss: The camera may be disconnected and then reconnected at a certain time, which may cause the recording to be interrupted during that time.

2. Equipment failure: The camera or recording equipment may fail at a certain time and then recover, which may cause the recording to be interrupted during that time period.

3. Motion detection: If the recording mode of the surveillance system is motion detection, that is, when there is a change in the screen that exceeds the set threshold, the recording starts and is maintained until the change disappears, then when there is no moving object, the recording may be paused, and the playback will be skipped.

4. Power Issues: The monitoring system's equipment may have stopped working at one time and later come back with a call, which may cause the recording to be interrupted during the power outage.

5. Other technical problems: Poor connection of the signal cable, poor contact of the power cable or signal cable, failure of the hard disk, etc. may cause the recording to be interrupted in a certain period of time.

The solutions to these problems include checking for line faults, making sure the power supply is working, checking if the camera is working, checking if the hard drive is faulty, etc. If the problem persists, it is recommended to ask a professional monitoring contractor for inspection and repair.

# Smart Hardware #

《Monitor playback skipping a reason》 This does not represent the views of this website. If there is any infringement, please contact us to delete it.

Latest article

Recommend

Ranking