Automatic identification of barrier non-falling rods

time：2025-06-06 16:01:04 Smart Hardware

Content 1:

1. The triple button is set to manual mode: the barrier button is set to manual mode, and the barrier will only drop the lever when it is manually operated. Solution: Set the triple button to automatic mode.

2. Fault of the barrier line: the ground induction coil is buried incorrectly or the coil is damaged or broken

3. Computer problems, the system hardware configuration is too low (usually serious jamming, the license plate has been recognized but the lever has not been lifted in time). The system needs to be reinstalled.

Content 2:

1. Set the triple button to automatic mode;

2. Check whether the OUTPUT indicator on the ground sensing processor of the barrier is flashing green;

3. Restart the power of the barrier gate to see if it is normal. If it is not normal, replace the ground sensing processor and measure the on-off of the ground sensing coil;

# Smart Hardware #

《Automatic identification of barrier non-falling rods》 This does not represent the views of this website. If there is any infringement, please contact us to delete it.

Latest article

Recommend

Ranking