Square watch back cover removal tutorial

time：2025-08-03 09:01:24 Smart Hardware

Reference content 1:

1. Take opening the back cover of a mechanical watch as an example, and push the back cover open with your fingers, as shown in the figure below:

2. You can see that there is a high wall around the shape of the back cover of the case, as shown in the figure below:

3. The table glass and the back cover are tightly covered, as shown in the following figure:

Reference content 2:

1. First, use tweezers to clamp the source of the watch shaft and remove the strap. As shown in Fig

2. Pry open the dial with a thin iron sheet or knife to open the back cover of the watch. As shown in Fig

3. Remove the fixing ring, and you can see the various movements and other parts inside the watch. As shown in Fig

Reference content 3:

4. Precautions

1. When removing the back cover of the watch, always make sure that the watch has stopped running to prevent accidental damage to the movement.

2. During the disassembly process, avoid allowing the watch to be hit or dropped, so as not to affect the accuracy of the watch.

# Smart Hardware #

《Square watch back cover removal tutorial》 This does not represent the views of this website. If there is any infringement, please contact us to delete it.

Latest article

Recommend

Ranking